Category Archives: Woodwork

Wood shim shoe cabinet — and a prize contest!

Check it out, friends!

I picked up this bad boy at Goodwill for only $15! It’s actually a shoe cabinet — the “drawers” fold out! This is NOT a quality piece. Notice the paper laminate peeling from the corner of the before pic? This was a practical purchase for my family to HIDE THE SHOES! (Because shoes are always a problem.) Can anyone else relate?

Wood shim shoe cabinet  I  becauseiliketodecorate.com

This is an example that shows just how much you can transform what was simply a boring piece of furniture.

You’re probably wondering what products were used, etc. So here we go. Let’s start with my paint choice for the exterior. I used Glidden’s Gel Technology High-Gloss Trim & Door paint in Bright White and also painted the knobs with the same paint.
Wood shim shoe cabinet  I  becauseiliketodecorate.com

After planning out my alternating wood pattern, the shims were stained with Minwax Jacobean and glued onto the face of the cabinet “drawers” using Liquid Nails. This needs to dry for 24hrs and you’ll need clamps to hold the pieces into place as they dry. I used a miter saw to make a few cuts, but you could probably get away with just a hand saw since the shims are so thin.Wood shim shoe cabinet  I  becauseiliketodecorate.com

Wood shim shoe cabinet  I  becauseiliketodecorate.com

The best part about this project is how budget friendly it was. Wood shims are about $1.25 for a pack of 12, and the paint and stain were both purchased for another project — so that didn’t cost me anything. That brings my total to only $20 for a custom shoe cabinet that has that high-end look without the high-end price!

Wood shim shoe cabinet  I  becauseiliketodecorate.com

Contest

Now let’s talk about the contest portion of this post! This furniture piece is nameless. If you haven’t noticed by now, I usually name each furniture makeover something that fits its new character and style. So what do you think? Do you have a name for him or her? There are many ways that you can enter and increase your chances! Annnnnnnddddddddd……GO!

UPDATE: I’m having a bit of trouble with WordPress accepting the contest widget (hoping to get this fixed). Please click on the giveaway link below to enter the contest! There are 8 different ways to throw YOUR NAME in the hat!

CLICK HERE TO ENTER THE GIVEAWAY!

THE WINNER WILL RECEIVE COFFEE ON ME, A $25 GIFTCARD TO STARBUCKS!

Starbucks logo

Lots of love,
Mary

Linking up here:


Furniture Feature Fridays

DIY Custom Rustic Signage

This past summer, I was given the honor of preparing a very special surprise gift for my Auntie Margie during her wedding vow renewal ceremony! Auntie Margie is so very special to me! She has been battling stage four breast cancer and is the picture of the Lord’s strength and grace throughout this trial in her life. She is such an example to me! You could imagine my excitement when the church asked me to prepare a special gift using one of her favorite passages “I will bless the Lord at all times, His praise shall continually be in my mouth” Psalm 34:1

Psalm34.1

I used 8″ wide lightweight boards from the hardware store and mounted them on 1’x4′ horizontal boards. Using a wood stain that I had on hand, each board was stained, waxed, and accented with watered down blue & green paints to create subtle color and texture.
Psalm34.1.3

The lettering design was created in Adobe Illustrator, printed, traced, and hand painted with a fine brush. Warning: This takes a very long time! If I had the tools, I would create a stencil and speed the process up quite a bit. But it was totally worth it for this project and I’d do it again in a heartbeat! :)Psalm34.1.4

I love the final result so much, that I totally want to make one for my own home! I keep checking craigslist for a vinyl cutter at a good price… the search continues.Psalm34.1.2

It looks just fabulous on her mantle! And don’t you just love her Christmas decor?
Lots of love,
Mary

Be still my heart…

I nearly died today when I saw this project in my inbox! It’s pure genius and just my style! The fab ladies over at East Coast Creative posted a tutorial for a DIY Wood Slice Wreath. I’m so excited about it, that I decided to push back the post I had scheduled for this evening and share this excitement with you – my friends.

source: http://www.eastcoastcreativeblog.com/2012/12/diy-wood-slice-wreath.html?showComment=1354771858798

source: http://www.eastcoastcreativeblog.com/2012/12/diy-wood-slice-wreath.html?showComment=1354771858798

My only dilemma is that I don’t have a chainsaw, nor a tree trunk, nor someone to slice the wood for me…

Lots of love,
Mary

Daddy’s Day Surprise

Happy Fathers Day to all daddies out there! We had the best day enjoying time with our little ones. Adi helped me make a cake for my husband and I was able to pull off a surprise project for his office. I’m so excited to show you!

Have you heard about the $5.00 engineers print that Staples offers in their print department? I got my inspiration from Pinterest here:

Basically, I took the kids outside with their “I Heart Daddy” chalkboard sign and took some photos. The same day, I sent my photo to the local staples copy center and ordered the engineers print in 3’x4′. The print was ready in minutes.

I then had a thin light-weight board cut to size at home depot. A little wood stain, adhesive spray, and mod podge later and voila!

Daniel LOVES it and now he has a large statement piece for his office at work. We’re sure to get some looks when we haul it into the office! Maybe we’ll hang it after hours… hmmm.

Hope your day was as lovely as ours was!

Lots of love,
Mary

Jane – A Contemporary Farm Table

Day one of my self inflicted five day challenge of painting and posting one piece of furniture per day. I decided to start with the dining table. Go big or go home right? Meet Jane:

She was in bad shape when we picked her up from one of our local thrift stores. Notice the table top varnish is cracking and chipping off?

The base is a retro contemporary design that looks to be from the 60’s era, matched with a thick tabletop. She needed to be brightened up a bit and I knew that I wanted to take advantage of all the knicks and scratches on the top!

I started with a light sanding by hand to make sure there weren’t any rough edges. I then took a watered down solution of Annie Sloan Chalk Paint (ASCP) in Old White, and began a random pattern of brushing on and wiping off until I achieved the balance I was looking for. Next, I applied one coat of Annie Sloan Clear Wax (applied with a brush and buffed with a clean dry cloth), followed by one coat of Annie Sloan Dark Wax (also applied with a brush and buffed with a clean dry cloth) over the entire tabletop.

This was the first time I used the dark wax so liberally, and let me just say that I LOVE the result! I would totally keep this table for myself if it was the right scale for my dining room!

I chose ASCP in Duck Egg Blue for the base — Just one thick coat, distressed, with a coat of clear wax to finish.

The base brings in just a little pop of color that accents the natural looking tabletop so well!

This was such a fun project, one of my favorites for sure! I can’t wait to paint my next dining table!

Jane has been posted on Craigslist here.

Lots of love,
Mary

DIY custom scrap wood art – FREE

Yep, I said free! Check out Craigslist in your area. I picked up about a dozen scrap pieces of wood in various sizes at no cost. The paint and wood stain that I used was just what I had on hand from other projects. I would encourage you to just use what you have.

My first step was to brush the entire board with Minwax bombay mahogany wood stain. I used two coats and let dry for 24 hours.

Next, I used some painters tape to map out my letters, etc. Then, using a whitewash solution of Annie Sloan chalk paint in pure white, I used a rag to rub the paint into the remaining portion of the board and was careful not to let the solution bleed underneath the taped portion.

The artwork was finished with AS clear wax and polished smooth. The wax really helped smooth the rough edges of the board and provided a nice finished product. I’m very pleased with the results and can’t wait to make more with my remaining scraps!

Lots of love,
Mary

DIY oversized growth chart ruler

I did it! I think this was one of the first ideas that was pinned from Pinterest that I actually executed. The girls have been growing so fast and I felt like each day that went by I was missing the opportunity to capture those memories. So off to Home Depot I went!
This is a photo of my final product:

And here is the original inspiration photo that I saw on Pinterest. Different versions of this are all over the internet these days. I believe this idea was originally done and sold by Pottery Barn, then all of the DIYers (like myself) decided, “Hey, we can make this for WAY cheaper.”

If you know me, you know that I’m not one for following directions well. I like to find shortcuts at every turn and I often get myself in trouble because of it. In my defense, I also find some terrific shortcuts! All that to say, I haven’t read any of the other tutorials out there. I bet they are fantastic and way better than mine. I can imagine it’s been done with paint and probably even cut out laminate pieces. I’m too impatient and I just looked at the photo and went for it.

So I started by purchasing a piece of wood from Home Depot. You may not know it, but they sell pre-cut and pre-finished wood pieces in various sizes. I didn’t know that until just recently. I picked up a piece of pine wood 6′ tall and 9″ wide.

I wasn’t about to try and paint the letter detailing with a brush because, quite frankly, I don’t trust myself to paint that well without a stencil. And I was too impatient to run out and get a number stencil, so I decided to freehand with pencil first using a small scale ruler as my guide for the font. Then, I used a Sharpie over the pencil for the permanent markings. It worked extremely well. I was concerned that the Sharpie would bleed, but as it turns out I didn’t have any trouble with that at all.

I then coated the entire board with Minwax Bombay Mahogany wood stain, let it dry, then finished it off with a light coat of Annie Sloan soft wax. I used wax rather than polyurethane because I didn’t want to deal with the smell and I just love the finish of soft wax. It’s easy to use and provides a nice, smooth texture without being too shiny.

I’m more than pleased with the results! This is now such a treasured piece in the home. I look at it daily and imagine all the markings that we get to imprint over the years as our children grow.

After purchasing and trying out several pens, I finally found one that would write over the nice wax finish. Again, good ol’ Sharpie — I found out that they make a paint pen! Worked like a charm. :)

By far, this is one of my favorite projects to date!

Lots of love,
Mary


Update: 06.04.12

I’ve been asked about how to attach the piece to the wall, since it is so large. I used some basic hooks that can be found at any hardware store. I like these because they aren’t visible from the front of the board and they are very secure.

I then used drywall screws into the wall rather than nails. Leave them sticking out a little so that the hooks will fit nicely. I LOVE drywall screws and use them for just about anything.

Hope this helps!
Lots of love,
Mary

Linked up here:
Lovely Crafty Home